
Contact Form
Please fill all fields marked with *
Submit
Products
Non Destructive Testing » Penetrant Equipment & Accessories
Atago Refractometer MASTER 53M
Darkroom Timer
Description | Product |
Plastic boot over the power switch prevents corrosion from chemicals or water. Easy-to-read numerals on a large 6 1/2 inch diameter face. Numerals, dial and hands are luminous. Setting knob for fast fingertip control. Precision accuracy assured by electric synchronous motor. Buzzer automatically signals end of period. One second to sixty seconds. | ![]() |
Dema Injector
Description | Product |
For spraying hydrophilic emulsifier. The emulsifier is drawn into the water stream by the Dema valve, emitting an emulsifier/water spray. The Dema Injector allows the penetrant user to process parts with the hydrophilic method without adding large dip tanks. | ![]() |
Sure Shot Pressure Sprayer
Description | Product |
Portable, lightweight pressure sprayer for spot application of penetrants, developers, and cleaner. Interchangeable nozzles for mist or pin spray. One quart capacity. Uses shop compressed air. Chrome-plated brass. Measures 9"H x 4"Dia. | ![]() |
Water Temperature Guage
Description | Product |
Thermometer, dial size 3 inches, temperature range 0 to 250 degrees fahrenheit, stem length 2.5 inches, 1 percentage dual scale accuracy. | ![]() |
WG-1 Wash Gun
Description | Product |
A sturdy Tri-Con spray wash gun meeting MIL-I-6866 and ASTM E 1417 requirements. The Tri-Con gun is available with or without the full jet nozzle that emits coarse spray without air pressure. | ![]() |
Flaw Dimension Tool - TAM# 190466A
Description | Product |
Plastic swing-away keys. Tapered and angled for tight radius comparisons. Linear and circular fluorescent marks in inches for flaw dimension comparison under UV light. The tool measures graded flaw markings from .010 to .0180 inches. Pratt-Whitney model. | ![]() |
Fluorescent Comparator
Description | Product |
A plastic ruler with linear and circular fluorescent marks in inches for flaw dimension comparison under UV Light. The tool measures graded flaw markings from .005 to .125 inches. General purpose model. | ![]() |
Fluorescent Comparator - G.E.
Description | Product |
A plastic ruler with linear and circular fluorescent marks in inches for flaw dimension comparison under UV Light. The tool measures graded flaw markings from .005 to .125 inches. General purpose model. General Electric model. | ![]() |
Fluorescent Comparator TAM# 135273
Description | Product |
A plastic ruler with linear and circular fluorescent marks in inches and millimeters for flaw dimension comparison under UV Light. The tool measures graded flaw markings from .010 to .180 inches. (.2 to 4.6mm) Pratt & Whitney model. | ![]() |
Spray Can Gun
Description | Product |
Sherwin Incorporated's Spray Can Gun is an essential accessory for penetrant spray can users. The Can Gun precisely controls the flow of penetrants and developer; improves performance; reduces waste and sloppiness; and speeds production. The Can Gun fits any standard spray can and is reusable. | ![]() |
Surface Temperature Thermometer
Description | Product |
A dual magnet surface temperature thermometer, designed to measure temperatures of many different surfaces. The bimetallic sensor is a specially processed alloy, preconditioned and pre-tested for permanent calibration and maximum stability. The thermometer reaches sensing equilibrium within three minutes, and is accurate within 2%. | ![]() |
PSM-5 Test Panel (TAM Panel)
Description | Product |
Sherwin Incorporated are one of two Pratt and Whitney approved manufacturers of the "Penetrant System Monitoring Panel" which provides a quick means of determining the continued serviceability of liquid penetrant inspection systems: fluorescent or visible; water-washable; post-emulsifiable, or pre-wash. Sherwin Incorporated manufactures each PSM-5 panel to P&WA specifications. A stainless steel panel, 0.090" thick and measuring 4 x 6 inches. A chrome or grit plated strip runs the length of one side of the panel. Five cracked starbursts are evenly spaced in the chrome or grit plating in order of magnitude; the largest is readily visible with low sensitivity penetrants, while the smallest is difficult to observe even with high sensitivity materials. | ![]() |
Sherwin TWIN KDS Panels
Description | Product |
A pair of nearly identical panels measuring 2 x 6 inches and 0.090 inch thick with matching crack patterns. Being rugged, Sherwin Twin KDS Panels may be used to satisfy MIL-STD-6866 and ASTM E-1417 requirements for daily systems check. And, having matching cracks of known sizes, the panels may be used to compare penetrant performance. | ![]() |
Sherwin Wash Test Panel
Description | Product | |
The 1.5 x 2 inch panels are made from 16 gauge 301 or 302 stainless steel by grit blasting with 80 mesh aluminum oxide grit and 60 psi of air pressure. The roughened surface that is produced is free of scraches and blemishes. This panel is used to run removability tests, in a laboratory or production line setting. Available as shown with or without polished section. | ![]() WTP 1 |
![]() WTP 2 |
Twin Nickel Chromium Sensitivity Panels
Description | Product |
A set of two panels, each measuring 3.875 x 1.875 inches (100 x 35mm), sheared from the same stock with matching crack patterns. Makes simultaneous comparison of two penetrant batches practical. Specify crack sizes of 10µm, 20µm, 30µm, 50µm. | ![]() |
Cracked Aluminum Blocks
Description | Product |
Pressure code, section V & III, MIL-I-25135 and AMS-2644. The cracked aluminum block is made from SB-211 Type 2024 aluminum, rolled 3/8 inch thick with dimensions of 2 x 3 inches. A notch separates the block's two sides to facilitate side-by-side comparisons. | ![]() |
Panel for Aqueous Developer
Description | Product |
Aqueous developer check panel made from aluminum. Measures 3 x 10 inches. ASTM E-1417. | ![]() |
© Copyright Callington Haven Pty Ltd. All Rights Reserved | Sitemap | Privacy